具有学习和退化效应的单机干扰管理问题

针对工件同时具有学习和退化效应、机器具有可用性限制这一问题,建立可预见性单机干扰管理模型。在这一模型中,工件的加工时间是既与工件所排的加工位置又与工件开始加工的时间有关的函数。同时,在生产过程中由于机器发生故障或定期维修等扰动事件导致机器在某段时间内不能加工工件。目标是在同时考虑原目标函数和由扰动造成的偏离函数的情况下,构建一个新的最优时间表序列。根据干扰度量函数的不同研究了两个问题,第一个问题的目标函数是极小化总完工时间与总误工时间的加权和;第二个问题的目标函数是极小化总完工时间与总提前时间的加权和。对于所研究的问题,首先证明了最优排序具有的性质,然后建立了相应的拟多项式时间动态规划算法。     

Modified two-grid method for solving coupled Navier-Stokes/Darcy model based on Newton iteration

A new decoupled two-gird algorithm with the Newton iteration is proposed for solving the coupled Navier-Stokes/Darcy model which describes a fluid flow filtrating through porous media. Moreover the err...     

Nd∶YVO4/Nd∶GdVO4双波长激光器的功率均衡实验研究

实验研究了Nd∶YVO4/Nd∶GdVO4双波长激光器在不同抽运功率条件下,通过调节热沉温度达到功率均衡时的输出特性.实验结果表明:对于Nd∶YVO4/Nd∶GdVO4双波长激光器,当提高抽运功率,需要重新降低热沉温度达到功率均衡输出,降温幅度与抽运功率增加之比为11.23℃/W.与此同时,随着抽运功率和热沉温度的变化,双波长激光器的中心波长会出现小幅度的漂移,左峰波长随抽运功率增加的蓝移速率为0.056 nm/W,右峰波长随抽运功率增加的蓝移速率为0.054 nm/W.实验还发现功率均衡条件下激光器的输出总功率随抽运功率的增加而增加,拟合斜效率为8.7%,当抽运功率为5.58 W时,输出最大总功率达到115.7 mW.     

Polarized SERS Controlled by Anisotropic Growth on Ordered Curvature Substrate

Colloidal lithography is an efficient and low-cost method to prepare an ordered nanostructure array with new shapes and properties. In this study, square-shaped and cone-shaped Au nanostructures were obtained by 70° angle deposition onto polystyrene bead array with the diameter of 500 nm when a space of 120 nm is created between the neighbor beads by plasma etching. The gaps between the units decrease when the Au deposition time increases, which leads to the polarized enhanced local field, in agreement with the surface-enhanced Raman scattering spectra (SERS) observations and finite-difference time-domain (FDTD) simulations. When the Au deposition time increased to 5 min, 5 nm gaps form between the neighbor units, which gave an enhancement factor of 5 × 10⁹. The SERS chip was decorated for the detection of the liver cancer cell marker Alpha-fetoprotein (AFP) with the detection limit down to 5 pg/mL.     

Feasible Tuning of Surface OVs on (001) TiO2 for Superior Photocatalytic Nitrogen Fixation Activity

A feasible tuning method for oxygen vacancies was realized by annealing under 3 atm H₂ with (001)-exposed TiO₂ nanosheets. The colored TiO₂ sample exhibits an excellent N₂ photo-fixation rate owing to the abundant oxygen vacancies (OVs) thus demonstrating that annealing with high pressure H₂ is exceedingly efficient for tuning surface OVs.     

Nano-carbides as accelerants for boron oxidation reaction

Journal of Thermal Analysis and Calorimetry - Nano-materials are potential substitutes for micro-sized solid propellant ingredients for improving energy density and reaction activity. So far,...     

求解定常不可压Stokes方程的两层罚函数方法

借助于两套有限元网格空间提出了一种求解定常不可压Stokes方程的两层罚函数方法.该方法只需要求解粗网格空间上的Stokes方程和细网格空间上的两个易于求解的罚参数方程（离散后的线性方程组具有相同的对称正定系数矩阵）.收敛性分析表明粗网格空间相对于细网格空间可以选择很小，并且罚参数的选取只与粗网格步长和问题的正则性有关.因此罚参数不必选择很小仍能够得到最优解.最后通过数值算例验证了上述理论结果，并且数值对比可知两层罚函数方法对于求解定常不可压Stokes方程具有很好的效果.     

非Fourier温度场分布的奇摄动解

应用非Fourier热传导定律构建了单层材料中温度场模型，即一类在无界域上带小参数的奇摄动双曲方程，通过奇摄动展开方法，得到了该问题的渐近解.首先应用奇摄动方法得到了该问题的外解和边界层矫正项，通过对内解和外解的最大模估计和关于时间导数的最大模估计以及线性抛物方程理论，得到了内外解的存在唯一性，从而得到了解的形式渐近展开式.通过余项估计，给出了渐近解的L2估计，得到了渐近解的一致有效性，从而得到了无界域上温度场的分布.通过奇摄动分析，给出了非Fourier 温度场与Fourier 温度场的关系，描述了非Fourier温度场的具体形态.     

CdBiO2NO3, a new layered bismuth oxide nitrate

Step-wise reaction of CdO, Bi₂O₃, and Cd(NO₃)₂^·4H₂O leads to formation of a novel bismuth oxide nitrate, CdBiO₂NO₃, which completes the family of bismuthite-like M^IIBiO₂NO₃ oxide nitrates. The new compound is tetragonal, I4/mmm, a = 3.9486(1)Å, c = 14.2235(2)Å; its crystal structure resembles those of PbBiO₂NO₃ and CaBiO₂NO₃, except for, probably, different positioning of the nitrate group. The compound is stable until ∼425 °C when it decomposes, in one step, into CdO and a mixture of Bi–Cd oxides. Cd-based analogs of isostructural PbLnO₂NO₃ (Ln – lanthanides) oxide nitrates are unlikely to exist. We discuss the similarities and differences in the structures of layered oxyhalides and oxynitrates of bismuth and rare-earths.     

Enhanced coding for exponentially distributed signals using suprathreshold stochastic resonance

Our previous work on stochastic resonance (SR) in threshold based systems proved that the SR effect is dependent on the nature of the input signal distribution; more specifically, for certain types of signal distribution SR is not observed [Das A, Stocks NG, Nikitin A, Hines EL. Quantifying stochastic resonance in a single threshold detector for random aperiodic signals. Fluctuation Noise Lett 2004;4:L247–65]. Here we show that suprathreshold stochastic resonance (SSR) – a novel and distinct form of SR – removes this limitation and hence leads to the conclusion that SSR can probably enhance the transmission of signals of any distribution and amplitude. SSR effects are studied in a parallel array of identical nonlinear threshold based devices. A double exponential signal distribution is chosen because this distribution did not demonstrate conventional SR effects in a single threshold device [Das A, Stocks NG, Nikitin A., Hines EL. Quantifying Stochastic resonance in a single threshold detector for random aperiodic signals. Fluctuation and Noise Letters 2004;4:L247-L265.]. SSR as a possible mechanism for enhancing transmission of speech signals in the human ear is also discussed.